iconv

Iconv 10/100BASET To 100BASEFX St/mm 1310/5KM Wall Mnt Mgt Wide
$572.99
Item #: K31447. This is a Special Order Item. Please allow up to 7 business days for product to ship. The iConverter 10/100M Network Interface Device (NID) media converter provides 10Base-T or 100Base-Tx (10/100) unshielded twisted pair (UTP) to 100Base-Fx Fiber media conversion with integrated management.The 10/100M conforms to Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. 10/100M media converters are used to provide managed copper demarcation points at the customer premises and network edge, offering Quality of Service and rate-limiting (Bandwidth Control) capability.The 10/100M utilizes the iConverter management system to remotely monitor network status, configure hardware parameters, generate statistic reports and receive a variety of user-specified traps.The iConverter management system reduces Operations, Administration and Maintenance (OAM) expenditures by keeping "truck rolls" to a minimum through remote provisioning and instant trap notification capability.The hot-swappable 10/100M plug-in module can be mounted in a 19 or 5-Module chassis with any combination of hot-swappable redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.The 10/100M plug-in module can manage other modules in the same chassis, providing status monitoring and parameter configuration.The 10/100M plug-in module also features two backplane Ethernet ports for connectivity to adjacent modules in a multi-module chassis. For example, when the 10/100M plug-in module is installed in a 2-Module chassis with an iConverter 4TxVT four-port switch module, the backplane Ethernet ports can connect the 10/100M to the 4TxVT. Functioning as a remotely managed demarcation switch, the 10/100M can provide a fiber uplink port to the network core and allow the connected 4TxVT to provide four copper ports that drop off Ethernet service to

Iconv 4T1 Sf 4X T1/E1 +10/100 Sc/sm TX15/RX13/20KM Mux Sa 48VDC
$1,575.99
pThe iConverter 4xT1/E1 MUX operates in pairs, and can be used in applications where services from legacy TDM equipment requires transport across long distances that exceed the reach or capacity of copper. This includes applications such as T1/E1 extension, mobile backhaul and building-to-building PBX connectivity, making it ideal for Enterprise, Telecom and Utility industries./p

Omnitron ICONV GX SINGLE FIBER (BASET-X) ( 8510-1 )
$1,995.00
The iConverter Gx managed media converters are members of the modular iConverter product family. They provide 1000Base-T UTP to 1000Base-Sx/Lx fiber conversion.The iConverter Gx models are available in multimode, single-mode, and single-fiber options. They support ST, SC, MT-RJ, and LC connectors. The UTP port supports 1000Base-T in either half or full duplex mode. A UTP crossover mode eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.The iConverter Gx features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation, and reporting.The iConverter Gx modules are hot swappable and can be mounted in a 19-Module (2U, 3.5 inch high), 5-Module (1U, 1.75 inch high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC and 48VDC power supplies. They can also be mounted in a 2-Module AC or 48VDC powered chassis or in a 1-Module AC powered chassis.The iConverter family is an In-Band or Out-of-Band SNMP-managed media converter family. Supporting 10, 100, 10/100, Gigabit Ethernet, T1, E1, OC-3 and OC-12 technologies, the iConverter family is suitable for LAN and MAN networks where copper to fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions are required.

Omnitron 5SLOT ICONV MANAGABLE CHASSIS ( 8220-1 )
$525.00
The 1U (1.75 inch) high, 5-Module Managed Power Chassis can be mounted in a 19-inch or 23-inch rack and features dual hot-swappable redundant power supplies. Universal AC or 48V DC power supplies can be used in any combination. The power supplies operate in load-sharing mode for improved reliability and fault tolerance. When used with the iConverter management module, the power system reports the voltage, current and temperature of each power supply. Any out of range violation can be set to trigger an SNMP management alarm to allow quick corrective maintenance. The high reliability of the dual-redundancy power system combined with its AC or 48V DC power options make the 1U 5-Module chassis the ideal choice in Point of Presence (POP), Customer Premise Equipment (CPE) and Network Edge (NE) applications where reliability, modularity and space are critical. The iConverter 5-Module Managed Power Chassis supports the entire family of In-Band or Out-of-Band SNMP managed media converters. Supporting 10, 100, 10/100, Gigabit Ethernet, T1, E1, OC-3 and OC-12 technologies, the iConverter family is suitable for LAN and MAN networks where copper to fiber, multimode fiber to single-mode fiber, dual fiber to single-fiber, or copper to coax conversions are required. Additional modules include redundant fiber or UTP, and a 4-port 10/100 switch module.